transient recovery voltage

基本解释

In order to enhance the single-phase auto-reclosing success rate, we must inhibit the arc current and the Transient Recovery Voltage efficiently.
为提高单相自动重合闸的成功率，必须有效抑制潜供电流以及熄弧后的暂态恢复电压。
During the voltage recovery period after the extinction of fault arc, the amplitude and phase of transient fault voltage is essentially different from those of permanent fault voltage.
当瞬时性故障发生时，在短路点电弧熄灭后的恢复电压阶段，断开相各电气量的关系与永久性故障将有本质的不同。
For transmission lines with no shunt reactor, the magnitude and the angle of the recovery voltage of fault phase under permanent faults are quite different from that under transient faults.
仿真实验验证该判据能可靠区分瞬时性故障和永久性故障，并且有较高的灵敏度。